Tinkle for IP Phone
      Back to home
      1. Help Centre | Knowledge Base
      2. How-to Guides
      3. Tinkle for IP Phone

      Transfer calls with Tinkle for IP Phone

          Blind Transfer: 

      •  Press the transfer button. 
      •  Dial the number and press the “BlindTrnf” softkey to complete transfer of the active call.

          Attended Transfer:

      •  Press the transfer button and the active LINE will be placed on hold automatically.
      •  Dial the number and press once the call is established, press the “AttTrnf” softkey.
      •  Once the call is answered press Transfer softkey. 
      •  After the call is transferred, the phone will display an idle screen.  

          Dynamic Attended Transfer:

      • Set “Attended Transfer Mode” to “Dynamic” on Web GUI.
      • Establish one call first
      • Press transfer key to bring up a new line, and the first call will be placed on hold automatically.
      • Dial the number and press SEND button to make a second call.  
      • Press transfer key again to make the transfer.

        Notes: For Dynamic Attended Transfer, after dialing out the number for the second call, when the second call is not established yet (ringing), pressing “Cancel” will hang up the second call. If the second call is established (answered), pressing “Split” will resume the second call and keep the first call on hold. 

                  Note: Make sure that the “Disable Transfer” option is set to No from web UI.